[cisco-voip] H323 to CM 6.1.2

[Scott Voll]

no.  did I need to reboot?

Q931 looks normal.... but I'm not seeing the problem ones as I'm not sure
when they are happening.  It's not consistant.

Scott



On Mon, Aug 25, 2008 at 11:28 AM, Ryan West <rwest at zyedge.com> wrote:

>  Debug isdn q931 to make sure that your system is generating the message,
> make sure it's actually hitting your gateway.  Did you reboot your router
> after making the change?
>
>
>
> -ryan
>
>
>
> *From:* cisco-voip-bounces at puck.nether.net [mailto:
> cisco-voip-bounces at puck.nether.net] *On Behalf Of *Scott Voll
> *Sent:* Monday, August 25, 2008 2:23 PM
> *To:* cisco-voip at puck.nether.net
> *Subject:* [cisco-voip] H323 to CM 6.1.2
>
>
>
> I have a VGW (CMM) with a couple PRI's connected to my new CM 6.1.2
> cluster.
>
>
>
> I am having reports of calls not going through.(your call cannot be
> completed as dialed).
>
>
>
> All I did on the dial peers was change the IPV4:(new server cluster IP).
> All looks good
>
>
>
> is it an IOS issue or a CM issue.
>
>
>
> I call a DID and get the message and call it again and it works.  I thought
> it was my cell phone, but I'm getting more reports of it.
>
>
>
> if anyone can give me a starting spot, I would like to trouble shoot this.
>
>
>
> TIA
>
>
>
> Scott
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080825/7213b308/attachment.html>