[cisco-voip] H323 to CM 6.1.2

[Paul]

Maybe you need to start up a syslog server and then have users tell you when the problem calls are occuring. You can then parse through the logs around the time the problem occurs. Have you checked your CCM traces already?



----- Original Message ----
From: Scott Voll <svoll.voip at gmail.com>
To: Ryan West <rwest at zyedge.com>
Cc: "cisco-voip at puck.nether.net" <cisco-voip at puck.nether.net>
Sent: Monday, August 25, 2008 11:34:21 AM
Subject: Re: [cisco-voip] H323 to CM 6.1.2


no.  did I need to reboot?
 
Q931 looks normal.... but I'm not seeing the problem ones as I'm not sure when they are happening.  It's not consistant.
 
Scott


 
On Mon, Aug 25, 2008 at 11:28 AM, Ryan West <rwest at zyedge.com> wrote:

Debug isdn q931 to make sure that your system is generating the message, make sure it's actually hitting your gateway.  Did you reboot your router after making the change?
 
-ryan
 
From:cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Scott Voll
Sent: Monday, August 25, 2008 2:23 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] H323 to CM 6.1.2
 
I have a VGW (CMM) with a couple PRI's connected to my new CM 6.1.2 cluster.  
 
I am having reports of calls not going through.(your call cannot be completed as dialed).  
 
All I did on the dial peers was change the IPV4:(new server cluster IP).  All looks good
 
is it an IOS issue or a CM issue. 
 
I call a DID and get the message and call it again and it works.  I thought it was my cell phone, but I'm getting more reports of it.
 
if anyone can give me a starting spot, I would like to trouble shoot this.
 
TIA
 
Scott



      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080825/5ab5cadc/attachment.html>