[cisco-voip] Maximum number of T1 on 3845
Lelio Fulgenzi
lelio at uoguelph.ca
Tue Aug 26 18:57:47 EDT 2008
http://www.cisco.com/en/US/prod/collateral/routers/ps259/product_data_sheet0900aecd8057f2e0.pdf
i was referred to this by our SE. although the table says the 3845 will support 24 T1/PRI ports, the max simultaneous calls shows about 450 which is just under 20 ports (when dividing by 23, just under 19 when dividing by 24).
hope this helps.
--------------------------------------------------------------------------------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
"Bad grammar makes me [sic]" - Tshirt
----- Original Message -----
From: Voice Noob
To: Mordechai
Cc: cisco-voip at puck.nether.net
Sent: Tuesday, August 26, 2008 5:54 PM
Subject: Re: [cisco-voip] Maximum number of T1 on 3845
No they don't. Where in the world did you get that from????
On Tue, Aug 26, 2008 at 4:47 PM, Mordechai <m.rabinovich at nves.ca> wrote:
3845 supports at least 16, more likely 24 pris if I remember right. We chose
them over 6509e with CMM blades because they provided appropriate density
and a newer voip platform.
-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Matthew Saskin
Sent: Tuesday, August 26, 2008 3:25 PM
To: Voice Noob
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Maximum number of T1 on 3845
For one particular client I've got a series of 8 x 3845's with 12 PRI's
+ 230 configured xcoding sessions per device and no cpu/memory issues to
speak of. Nominal CPU utilization is around 35% with peaks of about 50%
during peak call times.
-matt
Voice Noob wrote:
>
> I think that device will support 12 or 14 PRI's. Don't remember off hand.
> On Tue, Aug 26, 2008 at 11:20 AM, Aman Chugh <aman.chugh at gmail.com
> <mailto:aman.chugh at gmail.com>> wrote:
>
>
> Just wanted to know if I can have 8 T1 pri terminate on Cisco 3845 ,
> any one already doing the same , any caveats that I need to be aware
> of , apart from the AS5300/5400 , what are my other options to
> terminate 8 T1 on a single router, I am putting in 6 PVDM2-64 to
> support this configuration.
>
>
> Aman
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net <mailto:cisco-voip at puck.nether.net>
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
No virus found in this incoming message.
Checked by AVG - http://www.avg.com
Version: 8.0.138 / Virus Database: 270.6.9/1635 - Release Date: 8/26/2008
7:29 AM
------------------------------------------------------------------------------
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080826/45b081d6/attachment.html>
More information about the cisco-voip
mailing list