[cisco-voip] ATA with CCME 4.x

[Paul]

ATA = two ephones under CCME.

Register two ports and assign ephone-DNs to them as needed.

Paul



----- Original Message ----
From: Syed Khalid Ali <khalid_khursheed at hotmail.com>
To: Paul <asobihoudai at yahoo.com>; cisco-voip at puck.nether.net
Sent: Tuesday, August 26, 2008 11:30:59 PM
Subject: ATA with CCME 4.x

 Paul,

I just checked Cisco docs for ATA-186 adapter and it says SCCP and SIP can be used with Call Manager, but nothing was there for Call Manager Express. 

Regarding the ports, you were point to limitation that only ONE-PORT can use G729 at a time.

Below is the link for SCCP support with Call Manager: http://www.cisco.com/en/US/products/hw/gatecont/ps514/prod_configuration_examples_list.html

So my qs. are:
1- An ATA adapter can be registered with CCME ?
2- If not, then we will required Dial-peer (on voice GW) to achieve this task.... Right ?

Regards,
Khalid

________________________________
Date: Tue, 26 Aug 2008 23:19:45 -0700
From: asobihoudai at yahoo.com
Subject: Re: [cisco-voip] (no subject)
To: khalid_khursheed at hotmail.com; cisco-voip at puck.nether.net

 
ATAs are compatible with CCME, yes.

You just have to be careful about the two ports since I'm assuming you're going to use a 186.

Paul

----- Original Message ----
From: Syed Khalid Ali <khalid_khursheed at hotmail.com>
To: cisco-voip at puck.nether.net
Sent: Tuesday, August 26, 2008 11:16:01 PM
Subject: [cisco-voip] (no subject)

All,

Can I integrate ATA adapter with CCME.

Regards,
Khalid

 
________________________________
Explore the seven wonders of the world Learn more!
 
________________________________
Invite your mail contacts to join your friends list with Windows Live Spaces. It's easy! Try it!


      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080826/9d0eee1c/attachment.html>