[cisco-voip] Elevator Phone

[Ocampo, Walter]

Hi Adam,
How is the Port? It is up?,
Do you the see the port unhook when they are dialing?I
Also, try to make a call out to the PSTN and do a debug in the gateway to see if you are getting the numbers?
What version are you running in the VG224?



From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Adam
Sent: Wednesday, August 27, 2008 9:14 AM
To: cisco-voip
Subject: [cisco-voip] Elevator Phone

I have a couple of elevator phones connected to a VG224 gateway that do not want to work. When you hit the call button they pick up the line and dial digits, but after a couple of seconds they disconnect. Other elevator units on campus work, but there is a combination of elevators manufacturers and phone models. I unfortunately do not have the make and model of the phones that don't work in front on me. Any suggestions? The VG224 gateways are MGCP controlled.

Thanks,
Adam
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080827/36de139e/attachment.html>