[cisco-voip] NANP cell numbers

[Lelio Fulgenzi]

www.localcallingguide.com lists the companies who control an exchange. you can usually tell by the company name whether it is landline or wireless.

then again, with number portability, that goes out the window. but as far as I know, you can't move a landline to a cell phone.
Lelio
--------------------------------------------------------------------------------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
...seen on a Geek Squad patch cord: "While it is the same length, this 7' crossover cable
is not regulation issue for most competitive Manhattan double dutch leagues.
  ----- Original Message ----- 
  From: Tim Smith 
  To: CiscoVoip Mailing List 
  Sent: Thursday, August 28, 2008 12:39 PM
  Subject: [cisco-voip] NANP cell numbers


  Hi guys,

  Is there a way to tell a cell number from a landline in the NANP?
  My standard practice everywhere else is to use some CFWDALL css's to block call forwarding to everything except internal numbers, and sometimes mobile numbers...

  Cheers,

  Tim


------------------------------------------------------------------------------


  _______________________________________________
  cisco-voip mailing list
  cisco-voip at puck.nether.net
  https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080828/8e0808cb/attachment.html>