[cisco-voip] CISCO 2851
David Toledo
DavidT at MorganMint.com
Tue Jun 3 16:18:57 EDT 2008
Sorry guys
I just need the be able to monitor the cisco router but the snmp must be
enable to use my application
To gather all the information to manage all my devices.
Now is showing:
SNMP logging: disabled
________________________________
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Nick Griffin
Sent: Tuesday, June 03, 2008 4:12 PM
To: David Toledo
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] CISCO 2851
Please toss us what your requirements are and we could provide a
solution.
On Tue, Jun 3, 2008 at 3:08 PM, David Toledo <DavidT at morganmint.com>
wrote:
I got it to work with the command bellow
But now when type the command: show snmp
It show that the: "SNMP logging: disabled"
Why is that
Thanks
David
________________________________
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Mordechai
Sent: Tuesday, June 03, 2008 3:48 PM
To: David Toledo; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] CISCO 2851
Where is the ^ marker stuck? If under ro than try upper case RO.
Otherwise the syntax is correct:
snmp-server community kh0vr0 RO 50
________________________________
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of David Toledo
Sent: Tuesday, June 03, 2008 3:36 PM
To: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] CISCO 2851
Sorry guys I'm not familiar with the command very well
I enable but not sure if woulf runn this command bellow
snmp-server community kh0vr0 ro 50 ???
! Create SNMP communities and username
!access-list 50 permit host xxxxxxxxxx
!snmp-server community kh0vrw RW 50
!snmp-server community kh0vr0 RO 50
!snmp-server system-shutdown
!username %%%% password xxxxxxx
Thanks
David
________________________________
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Nick Griffin
Sent: Tuesday, June 03, 2008 3:25 PM
To: David Toledo
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] CISCO 2851
have you enabled "enable" and entered config mode " conf t"
On Tue, Jun 3, 2008 at 2:22 PM, David Toledo <DavidT at morganmint.com>
wrote:
I try to enable my snmp on cisco 2851 I got this error
% Invalid input detected at '^' marker.
________________________________
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Nick Griffin
Sent: Tuesday, June 03, 2008 3:09 PM
To: David Toledo
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] CISCO 2851
snmp-server community BLAH
On Tue, Jun 3, 2008 at 2:06 PM, David Toledo <DavidT at morganmint.com>
wrote:
Does any one know how to enable snmp for the cisco 2851 router
Thanks
David
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
No virus found in this incoming message.
Checked by AVG.
Version: 7.5.524 / Virus Database: 269.24.6/1480 - Release Date:
6/3/2008 7:00 AM
No virus found in this outgoing message.
Checked by AVG.
Version: 7.5.524 / Virus Database: 269.24.6/1480 - Release Date:
6/3/2008 7:00 AM
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080603/c04df99a/attachment-0001.html>
More information about the cisco-voip
mailing list