[cisco-voip] CM 6.1 install time?

[Matt Slaga (US)]

For the actual install, yes two hours is about right.  That takes into
account though that your pre-work has been accomplished ahead of time
(i.e., requirements collected, addressing and naming, switch ports, rack
and stack, power etc).  Changing CDs is the smallest part of the whole
gambit.

 

 

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Scott Voll
Sent: Tuesday, June 03, 2008 6:09 PM
To: cisco-voip
Subject: [cisco-voip] CM 6.1 install time?

 

I will admit I'm installing on VMware for a Lab, but really, how log
should it take to install a lab version of CM 6.1.2?  I'm going on 2
hours.  The whole idea of the appliance is the quick install, right.

 

Scott




-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080604/dd26e74c/attachment.html>