[cisco-voip] How can I make E&M cross-over cable?

[서영석]

Hello~

I have to connect E&M between Voice Gateways ( cisco routers)

I would like to configure the 4 wire type 5 E&M cable.

If I connect E&M between voice Gateways, do I use E&M cross-over cable?

If so, How can I make its pinouts?

 

Thank you.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080605/5f15c362/attachment.html>