[cisco-voip] How can I make E&M cross-over cable?

[Joe Cisco]

http://www.ldfacts.com/faq_files/How-to-Make-a-T1-Crossover-cable.htm

-Joe C.

2008/6/5 Ryan West <rwest at zyedge.com>:

>  Pretty sure it is 1 to 2 and 4 to 5. It should be a standard t1 xover
> cable.
>
> Sent from my Windows Mobile� phone.
>
> ------------------------------
> From: 서영석 <sehsys at innet.co.kr>
> Sent: Thursday, June 05, 2008 3:28 AM
> To: cisco-voip at puck.nether.net <cisco-voip at puck.nether.net>
> Subject: [cisco-voip] How can I make E&M cross-over cable?
>
>   Hello~
>
> I have to connect E&M between Voice Gateways ( cisco routers)
>
> I would like to configure the 4 wire type 5 E&M cable.
>
> If I connect E&M between voice Gateways, do I use E&M cross-over cable?
>
> If so, How can I make its pinouts?
>
>
>
> Thank you.
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080605/f2fd61a9/attachment.html>