[cisco-voip] getting Unity Express to register a CTI route point
James Buchanan
jbuchanan at ctiusa.com
Thu Jun 5 15:14:47 EDT 2008
Sometimes Disabling and Enabling the CTI route point in Unity Express
will make it work.
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Lelio Fulgenzi
Sent: Thursday, June 05, 2008 2:12 PM
To: Cisco Voyp List
Subject: [cisco-voip] getting Unity Express to register a CTI route
point
I'm adding another call in number and application in unity express,
following the same procedure I did for the others and the CTI route
point is not registering.
I have added it as a controlled device for that userID.
Any clues? I don't have to restart Unity Express I hope!
Lelio
------------------------------------------------------------------------
--------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
...seen on a Geek Squad patch cord: "While it is the same length, this
7' crossover cable
is not regulation issue for most competitive Manhattan double dutch
leagues.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080605/5ea68143/attachment-0001.html>
More information about the cisco-voip
mailing list