[cisco-voip] getting Unity Express to register a CTI route point

[Lelio Fulgenzi]

Awesome! Thanks. I disabled the AA and then reenabled it and voilax.

Lelio
--------------------------------------------------------------------------------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
...seen on a Geek Squad patch cord: "While it is the same length, this 7' crossover cable
is not regulation issue for most competitive Manhattan double dutch leagues.
  ----- Original Message ----- 
  From: James Buchanan 
  To: Lelio Fulgenzi ; Cisco Voyp List 
  Sent: Thursday, June 05, 2008 3:14 PM
  Subject: RE: [cisco-voip] getting Unity Express to register a CTI route point


  Sometimes Disabling and Enabling the CTI route point in Unity Express will make it work.

   

  From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Lelio Fulgenzi
  Sent: Thursday, June 05, 2008 2:12 PM
  To: Cisco Voyp List
  Subject: [cisco-voip] getting Unity Express to register a CTI route point

   

  I'm adding another call in number and application in unity express, following the same procedure I did for the others and the CTI route point is not registering. 

   

  I have added it as a controlled device for that userID.

   

  Any clues? I don't have to restart Unity Express I hope!

   

  Lelio
  --------------------------------------------------------------------------------
  Lelio Fulgenzi, B.A.
  Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
  (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
  ...seen on a Geek Squad patch cord: "While it is the same length, this 7' crossover cable
  is not regulation issue for most competitive Manhattan double dutch leagues.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080605/1b0f104e/attachment.html>