[cisco-voip] SS7 on AS5350XM

[zohaib shabir]

You require Cisco PGW Softswitch for SS7 interconnection with PSTN. PGW
converts SS7 to ISDN signaling and there you will configure th originating
and terminating point code.

On 6/12/08, Tseveendorj Ochirlantuu <tseveendorj at gmail.com> wrote:
>
> Hi guys,
>
> I want to interconnect between AS5350XM and PSTN by SS7, C7 signaling. But
> I don't know how to do it. PSTN engineer ask from me what is your
> originating and terminating point code ?
>
> Where can I define this setting?  is it possible to configure SS7 on
> AS5350XM ?
>
> Thank you.
>
> Best regards,
> Tseveen.
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>


-- 
Regards,
Zohaib Shabir
Network Specialist- Voice
DWP Group, TECH Division Karachi
Ph:+92-302-8232689
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080612/f1e01192/attachment.html>