[cisco-voip] MWI Issue

[Scott Coner (US)]

Anyone seen an issue with MWI for unregistered devices in CM 6.1?
Configuration is CM 6.1 connected to Avaya PBX through Qsig trunk and
using Avaya VM for the IP phones.  If a VM is left for an unregistered
IP communicator there is no MWI set on the device the next time the user
registers.  We tried this with a physical phone also, if a VM is left
while a physical phone is unregistered there is no MWI when it registers
again.  If the devices are registered at the time the VM is left then
MWI functions properly.

 

Thanks,

 

Scott

 

 




-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080616/ccb83b08/attachment.html>