[cisco-voip] Logical partioning with CME

[Aman Chugh]

Thanks Joe for replying , Would COR be useful in logically partitioning CME
with TWO lines on an ephone with one line for internal calls and one line
used for pstn calls.

Aman


On 6/18/08, Joe Cisco <smetsysocsic at gmail.com> wrote:
>
> You should be able to use COR:
>
>
> http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeblock.html#wp1014179
>
> -Joe C.
>
>  On Wed, Jun 18, 2008 at 9:51 AM, Aman Chugh <aman.chugh at gmail.com> wrote:
>
>>  I need some help to come with a solution which is available in ccm but
>> not in cme. In India we keep two different lines on IP Phones for Internal
>> and PSTN calling due to regulations called logical partioning as we are not
>> allowed to do toll bypass. We can easily do this with CCM with the help of
>> partions and css but how can I have something similar with cme. My customer
>> has a site in UK with CCM and cme in India. when some one calls from UK over
>> the wan to an India IP Phone on cme using the wan , users can easily
>> transfer , conference PSTN because of E1 line on the CME router. How can I
>> have two lines on cme  ephone , one for internal calls and the other one for
>> PSTN calls.
>>
>> any help is appreciated.
>>
>> Thanks,
>>
>> Aman
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080618/bf07cbe4/attachment.html>