[cisco-voip] OT: mac book terminal program

[Nick Griffin]

Thats good, I'll give  you that. :)

On Thu, Jun 19, 2008 at 9:59 AM, Joe Cisco <smetsysocsic at gmail.com> wrote:

> Warning the following may be NSFW - due to some language.
>
> http://www.youtube.com/watch?v=iEAGmBRC1dc
>
> -Joe C.
>
>
> On Thu, Jun 19, 2008 at 9:07 AM, Frazee, Timothy <Timothy_Frazee at adp.com>
> wrote:
>
>>  Doesn't sound like it just works if you have to worry about drivers and
>> chipsets for a simple usb serial adapter.
>>
>>
>>
>> *From:* Nick Griffin [mailto:nick.jon.griffin at gmail.com]
>> *Sent:* Wednesday, June 18, 2008 7:03 PM
>> *To:* Frazee, Timothy
>> *Cc:* Vance Shipley; cisco-voip at puck-nether.net
>>
>> *Subject:* Re: [cisco-voip] OT: mac book terminal program
>>
>>
>>
>> It does....
>>
>> On Wed, Jun 18, 2008 at 3:47 PM, Frazee, Timothy <Timothy_Frazee at adp.com>
>> wrote:
>>
>> I thought everything just worked with a Mac…..
>>
>>
>>
>>
>>
>>
>>
>> *From:* cisco-voip-bounces at puck.nether.net [mailto:
>> cisco-voip-bounces at puck.nether.net] *On Behalf Of *Nick Griffin
>> *Sent:* Wednesday, June 18, 2008 3:17 PM
>> *To:* Vance Shipley
>> *Cc:* cisco-voip at puck-nether.net
>> *Subject:* Re: [cisco-voip] OT: mac book terminal program
>>
>>
>>
>> After you get the driver nailed down there is also a port of the nix term
>> program, minicom:
>>
>> http://minicom.darwinports.com/
>>
>> I use this daily and it works real well.
>>
>> On Wed, Jun 18, 2008 at 2:59 PM, Vance Shipley <vances at motivity.ca>
>> wrote:
>>
>> On Wed, Jun 18, 2008 at 03:20:42PM -0400, Ed Leatherman wrote:
>> }  I have a USB - serial cable, just looking for recommendation
>> }  on software (i can't find any software included in the OS
>> }  that does this). found a few in the wild but figured i'd ask around.
>>
>> First you need a driver for the serial cable.  Odds are it's got
>> a Prolific PL-2302 chip in it in which case use the driver here:
>>
>>        http://www.prolific.com.tw/eng/downloads.asp?ID=31
>>
>> This will create devices when you plug the cable in named:
>>
>>        /dev/tty.usbserial
>>        /dev/cu.usbserial
>>
>> You may use screen(1) to attach:
>>
>>        $ screen /dev/tty.usbserial
>>
>> Use ^A^\ to exit (control A, control backslash).
>>
>>        -Vance
>> _______________________________________________
>> cisco-voip mailing list
>>
>> cisco-voip at puck.nether.net
>>
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
>>    ------------------------------
>>
>> This message and any attachments are intended only for the use of the
>> addressee and may contain information that is privileged and confidential.
>> If the reader of the message is not the intended recipient or an authorized
>> representative of the intended recipient, you are hereby notified that any
>> dissemination of this communication is strictly prohibited. If you have
>> received this communication in error, please notify us immediately by e-mail
>> and delete the message and any attachments from your system.
>>
>>
>>
>> ------------------------------
>> This message and any attachments are intended only for the use of the
>> addressee and may contain information that is privileged and confidential.
>> If the reader of the message is not the intended recipient or an authorized
>> representative of the intended recipient, you are hereby notified that any
>> dissemination of this communication is strictly prohibited. If you have
>> received this communication in error, please notify us immediately by e-mail
>> and delete the message and any attachments from your system.
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080619/b1ffaa10/attachment.html>