[cisco-voip] SIP Audio Level
Ellington, Chris
Chris.Ellington at inin.com
Thu Jun 19 12:24:10 EDT 2008
Here's the situation:
CCM <-> SIP Provider (for VM only) - I have a low volume condition.
Calling within the CCM domain is fine, volume-wise and PSTN SIP calls
are fine going to voicemail - just between CCM and the voicemail I'm
getting _really_ low volume.
Any ideas?
chris
-----Original Message-----
From: Peter Slow [mailto:peter.slow at gmail.com]
Sent: Thursday, June 19, 2008 11:19 AM
To: Ellington, Chris
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] SIP Audio Level
Chris,
no attenution or amplification shoudl occur in a voip leg of call
ever. i would be very surprised if it _were_ possible to do this with
CUBE. the volume levels of the calls need to be adjusted at the voice
port in in the PSTN gateway, in the phones, or somewhere else in the
PSTN.
What's your call flow like, what devices are involved?
-Pete
On 6/18/08, Ellington, Chris <Chris.Ellington at inin.com> wrote:
>
>
>
> I'm getting low audio levels on a particular implementation with CCM
5.1
> (rest is unsure - I'm waiting on it) - is there any way to increase
the
> volume level on a SIP call w/o using a CUBE/SBC?
>
>
>
> Christopher Ellington | VoIP/SIP Engineer
> phone & fax +1.317.715.8578 | chris.ellington at inin.com
>
> CCIE #6814
>
>
> Interactive Intelligence Inc.
> Deliberately Innovative
>
> www.inin.com
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
More information about the cisco-voip
mailing list