[cisco-voip] SIP Audio Level

[Peter Slow]

so, your users are on the CCM using IP phones, and the VM provider is
out over the internet and your users are checking/leaving VMs on tht
system when they hear the low volume? Is that correct?

-Pete

On 6/19/08, Ellington, Chris <Chris.Ellington at inin.com> wrote:
> Here's the situation:
>
> CCM <-> SIP Provider (for VM only) - I have a low volume condition.
> Calling within the CCM domain is fine, volume-wise and PSTN SIP calls
> are fine going to voicemail - just between CCM and the voicemail I'm
> getting _really_ low volume.
>
> Any ideas?
>
> chris
>
> -----Original Message-----
> From: Peter Slow [mailto:peter.slow at gmail.com]
> Sent: Thursday, June 19, 2008 11:19 AM
> To: Ellington, Chris
> Cc: cisco-voip at puck.nether.net
> Subject: Re: [cisco-voip] SIP Audio Level
>
> Chris,
>   no attenution or amplification shoudl occur in a voip leg of  call
> ever. i would be very surprised if it _were_ possible to do this with
> CUBE. the volume levels of the calls need to be adjusted at the voice
> port in in the PSTN gateway, in the phones, or somewhere else in the
> PSTN.
>
> What's your call flow like, what devices are involved?
>
> -Pete
>
> On 6/18/08, Ellington, Chris <Chris.Ellington at inin.com> wrote:
> >
> >
> >
> > I'm getting low audio levels on a particular implementation with CCM
> 5.1
> > (rest is unsure - I'm waiting on it) - is there any way to increase
> the
> > volume level on a SIP call w/o using a CUBE/SBC?
> >
> >
> >
> > Christopher Ellington | VoIP/SIP Engineer
> > phone & fax +1.317.715.8578 | chris.ellington at inin.com
> >
> > CCIE #6814
> >
> >
> > Interactive Intelligence Inc.
> > Deliberately Innovative
> >
> > www.inin.com
> >
> >
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
> >
> >
>
>
>