[cisco-voip] H323 w/ a PRI and 8 Copper Line for Subtenant

[Roush, David]

Thanks Khalid for the link. I will give it a shot. Have you tried doing
it w/ translation patterns in Call Manager before sending it to the
voice gateway? Also, Can you think of any side effects of using Trunk
Groups for the fxo ports in instances like this?

 

From: Syed Khalid Ali [mailto:khalid_khursheed at hotmail.com] 
Sent: Thursday, June 19, 2008 4:23 PM
To: Roush, David; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] H323 w/ a PRI and 8 Copper Line for Subtenant

 

Hi,

I had a similar problem where some of executives had to have a dedicated
phone line. However major calls were done via 2 x PRIs.  Check this link
for mapping out calls to FXO ports:

http://www.cisco.com/en/US/tech/tk652/tk90/technologies_configuration_ex
ample09186a00801bc341.shtml

I hope this helps!

regards,

Khalid

________________________________

Date: Thu, 19 Jun 2008 14:15:20 -0400
From: droush at mckennalong.com
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] H323 w/ a PRI and 8 Copper Line for Subtenant

I'm about to migrate one of our remote offices from an Avaya G3 to Call
Manager 4.2(3) and they have a subtenant. Our office calls come/go via a
single PRI and the Subtenant uses 8 Analog Lines for their calls. We
would like to continue this pattern, but I'm having a hard time figuring
out how to route the subtenant's calls out the analog ports. We will be
using a 2851 w/ a VWIC2-2MFT for the PRI and 2 x VIC2-4FXO cards for the
8 analog lines. The gateway is going to be setup using H323. I figure I
can separate everything using Partitions and Calling Search Spaces, but
I can't figure out how to force the subtenant calls out via the fxo
ports. My first thought was to setup the gateway as both H323 and MGCP
and create separate Route Groups/Route List. Use H323 for PRI and MGCP
for the FXO ports. Then create route patterns and assign them to the
proper Route List. Another thought was to create a translation pattern
for outgoing calls for the subtenant to translate it from 9 to another
digit and create a matching dial-peer and send it out the fxo ports. Is
there an easier way of handling this?

 

Thanks


David 

 

CONFIDENTIALITY NOTICE: 

This e-mail and any attachments contain information from 

the law firm of McKenna Long & Aldridge LLP, and are 

intended solely for the use of the named recipient or 

recipients. This e-mail may contain privileged 

attorney/client communications or work product. Any 

dissemination of this e-mail by anyone other than an 

intended recipient is strictly prohibited. If you are not a

named recipient, you are prohibited from any further 

viewing of the e-mail or any attachments or from making any 

use of the e-mail or attachments. If you believe you have 

received this e-mail in error, notify the sender 

immediately and permanently delete the e-mail, any 

attachments, and all copies thereof from any drives or 

storage media and destroy any printouts of the e-mail or 

attachments.

 

________________________________

Invite your mail contacts to join your friends list with Windows Live
Spaces. It's easy! Try it!
<http://spaces.live.com/spacesapi.aspx?wx_action=create&wx_url=/friends.
aspx&mkt=en-us> 


CONFIDENTIALITY NOTICE: 
This e-mail and any attachments contain information from 
the law firm of McKenna Long & Aldridge LLP, and are 
intended solely for the use of the named recipient or 
recipients. This e-mail may contain privileged 
attorney/client communications or work product. Any 
dissemination of this e-mail by anyone other than an 
intended recipient is strictly prohibited. If you are not a
named recipient, you are prohibited from any further 
viewing of the e-mail or any attachments or from making any 
use of the e-mail or attachments. If you believe you have 
received this e-mail in error, notify the sender 
immediately and permanently delete the e-mail, any 
attachments, and all copies thereof from any drives or 
storage media and destroy any printouts of the e-mail or 
attachments.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080619/bc5d18d9/attachment-0001.html>