[cisco-voip] Paging system

[James Buchanan]

If using an FXS port, turn off battery-reversal (no battery-reversal).
If using an ATA, you have to go into the web interface of the ATA and
change the polarity reversal setting to 0x00000010.

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Voice Noob
Sent: Wednesday, June 25, 2008 5:06 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Paging system

 

I have a very ancient paging system that we found out about at the 11th
hour of a cut over to CUCM 6.1. I can connect an FXS port to it and it
pages once but does not dissconnect. What are some things I can try on
the 2821 gateway to make it dissconnect? Thanks for your help. 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080625/3d5e5417/attachment-0001.html>