[cisco-voip] Paging system

[Joe Pollere (US)]

Have a related question...

Have a client that is using the tamb connected to a vg224 port.
Everything works except the users are complaining of a "pop" when the
person paging hangs up. Any ideas on how to eliminate the "pop" at the
end of the page?

Thanks,

Joe

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Lelio Fulgenzi
Sent: Wednesday, June 25, 2008 9:10 PM
To: Voice Noob
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Paging system

get one of these and it will fix things up

http://www.bogen.com/products/pdfs/telephonepagepdfs/TAMBs.pdf

there are alternatives, like the ones from valcom, but i've used the
tamb and they work great. the disconnect issue is because of the FXS
port and if you had a trunk port or FXO port it would likely work
without it, but with an FXS port you need this for sure.

----- Original Message -----
From: "Voice Noob" <voicenoob at gmail.com>
To: cisco-voip at puck.nether.net
Sent: Wednesday, June 25, 2008 4:18:14 PM GMT -07:00 US/Canada Mountain
Subject: Re: [cisco-voip] Paging system


I think it is a MUZAK paging. 


On Wed, Jun 25, 2008 at 5:05 PM, Voice Noob < voicenoob at gmail.com >
wrote: 


I have a very ancient paging system that we found out about at the 11th
hour of a cut over to CUCM 6.1. I can connect an FXS port to it and it
pages once but does not dissconnect. What are some things I can try on
the 2821 gateway to make it dissconnect? Thanks for your help. 

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.