[cisco-voip] CUCM 6.0 - Calls with timing control?

[David Lima]

Thanks a lot Dennis for your answer, Do you know some good link for this  3rd party pplication, I'm really interested in this kind of software.

Best regards my friend

David


________________________________
De: Dennis Heim [Dennis.Heim at cdw.com]
Enviado el: viernes, 27 de junio de 2008 06:54 p.m.
Para: David Lima; Ryan West; cisco-voip at puck.nether.net
Asunto: RE: [cisco-voip] CUCM 6.0 - Calls with timing control?

To get that level of control, you are going to need some 3rd party apps. You will probably need a 3rd party Call reporting platform.

Dennis Heim
Network Voice Engineer
Berbee
11711 N. Meridian Street, Suite 225
Carmel, IN  46032

317.569.4255 Office
317.569.4201 Fax
317.694.6070 Cell
dennis.heim at cdw.com<mailto:dennis.heim at cdw.com>
www.berbee.com<http://www.berbee.com/>

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of David Lima
Sent: Friday, June 27, 2008 5:16 PM
To: Ryan West; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] CUCM 6.0 - Calls with timing control?

Thanks Ryan, is it works if I want to control the duration of a call to the PSTN (for example: a maximun of 5 minutes), after this time the call should be terminated.

Thanks again

David

________________________________
De: Ryan West [mailto:rwest at zyedge.com]
Enviado el: Viernes, 27 de Junio de 2008 03:09 p.m.
Para: David Lima; cisco-voip at puck.nether.net
Asunto: RE: CUCM 6.0 - Calls with timing control?

If you mean TOD routing, you can do that with partitions.

-ryan

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of David Lima
Sent: Friday, June 27, 2008 2:59 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] CUCM 6.0 - Calls with timing control?

Hi all,  I’m configuring different restrictions for calls in CUCM 6.0. Does anyone know how to configure calls with timing control?

Thanks a lot

Best regards

David