[cisco-voip] Outbound caller ID

[Hussam Ahmad]

In the route Pattern configuration page there is an option to change the
calling number:

Configure the Calling party transformation mask to be à XXXXXX

 


Thanks and best regards,

 

HUSSAM AHMAD

 

	

 

From: Martin Bufton [mailto:m.bufton at spectra-group.co.uk] 
Sent: Tuesday, December 08, 2009 4:12 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Outbound caller ID

 

I need some help yet again.

 

I am looking to push out caller ID on to the BT network, which only requires
the last 6 digits.

 

I have set my "External Phone Number Mask" on a per DN basis.

 

However in the top right of a phone it will only show 6 digits.

 

What I would like to do is in the top right of a phone show the full uk
number including area code.

 

But on my route pattern, push out the last 6 digits for the caller ID to BT

 

 

 

Can any one advise me on how I can do so please?

 

Thanks in advance

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20091208/c53e7dc1/attachment.html>