[cisco-voip] Outbound caller ID

[Liakos, James]

Hi Martin,
Depending on how your system is setup.
Make sure you have this setting setup correctly ?
Route Pattern Configuration → Calling Party Transformations. 
I am saying this because I had a similar issue the other day.

James
jliakos at csr.com.au
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Martin Bufton
Sent: Wednesday, December 09, 2009 12:12 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Outbound caller ID

I need some help yet again.
 
I am looking to push out caller ID on to the BT network, which only requires the last 6 digits.
 
I have set my "External Phone Number Mask" on a per DN basis.
 
However in the top right of a phone it will only show 6 digits.
 
What I would like to do is in the top right of a phone show the full uk number including area code.
 
But on my route pattern, push out the last 6 digits for the caller ID to BT
 
 
 
Can any one advise me on how I can do so please?
 
Thanks in advance