[f-nsp] No IPv6 for FCX -- AT ALL????

[Mike Allen]

George, right now that is correct, but it is changing.  With the next major
software release, IPv6 routing will be supported on the FCX with no
additional licensing or cost.  Still a couple months out, but it is being
addressed.

Mike

On Fri, Apr 22, 2011 at 1:58 PM, George B. <georgeb at gmail.com> wrote:

> So I was looking at an application coming up,  this just can't be real.  I
> am looking at the release notes for the latest code for FCX and is this
> right?  Tell me this is a misprint.  No IPv6 support at ALL?  Not even
> static routes?  I have an old Cisco Cat6500 with Sup-II modules that will
> static route IPv6.
>
> So in a small form factor the *only* hardware Brocade has capable of doing
> IPv6 is CER/CES???  Please tell me this is not correct and is some sort of a
> documentation goof.
>
>
>
> _______________________________________________
> foundry-nsp mailing list
> foundry-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/foundry-nsp
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/foundry-nsp/attachments/20110422/2496c4fc/attachment.html>