I have a WS-X5158 that is not going active in my 5505. I had a bunch of
these come in, and I was checking them out. This one WS-X5158 fails the
"SMD SPROM" test and the "SAR Loopback". Any ideas what this could mean?
I pulled the dram and flash from it and it works fine in another card. A
quick visual looked like all the jumpers were good.
Brian
-----------------------------------------------
Brian Feeny, CCIE #8036 e: signal@shreve.net
Network Engineer p: 318.222.2638x109
ShreveNet Inc. f: 318.221.6612
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:11:55 EDT