connect tx of one to rx of the other and vice versa then configure a pvc
> -----Original Message-----
> From: Prads [mailto:drix@pilnet.com]
> Sent: 25 May 2002 08:28
> To: 'Michael Damkot'
> Cc: cisco-nsp@puck.nether.net
> Subject: RE: [nsp] ATM interfaces...
>
>
> Hi,
>
> How should the interfaces be configured then? Should one be configured
> user and the other network? Can you guide me ho to do it? Also, should
> the tx/rx pairs be swapped on the other interface?
>
> Thanks in advance from a greenie.
>
> Prads
>
> -----Original Message-----
> From: Michael Damkot [mailto:mdamkot@UU.NET]
> Sent: Saturday, May 25, 2002 1:09 PM
> To: Prads
> Cc: cisco-nsp@puck.nether.net
> Subject: Re: [nsp] ATM interfaces...
>
> yes
>
> --
>
> Cheers,
> Michael Damkot CCNP
> Technical Trainer
> Network Engineer
>
> On Sat, 25 May 2002, Prads wrote:
>
> > Date: Sat, 25 May 2002 10:32:54 +0800
> > From: Prads <drix@pilnet.com>
> > To: cisco-nsp@puck.nether.net
> > Subject: [nsp] ATM interfaces...
> > Resent-Date: Fri, 24 May 2002 22:36:03 -0400
> > Resent-From: cisco-nsp@puck.nether.net
> >
> > Hi,
> >
> > Is it possible to connect atm interfaces back-to-back without an atm
> > switch in between?
> >
> > Thanks!
> >
> > Prads
> >
>
>
>
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:11:58 EDT