[nsp] 29xx and 3COM Vlan

From: Yuriy Kuznetsov (yuriy@uni-svishtov.bg)
Date: Sat Jun 15 2002 - 04:42:13 EDT

Next message: Richard Bosire: "Re: [nsp] Input queue drops on FastEthernet"
Previous message: Jared Mauch: "Re: [nsp] Corrupted 6500 MSFC bootflash:"
In reply to: Jared Mauch: "Re: [nsp] Corrupted 6500 MSFC bootflash:"
Next in thread: Steve Shultz: "Re: [nsp] Corrupted 6500 MSFC bootflash:"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

Hi
I have problems with C2924 and 3COM (3300) 802.1q trunk.
Cisco vlan 3 have SAID is 100003 but 3com 802.1Q VLAN ID not support
that big number... I reduce number into Cisco, make vlan with same name
and
ID into 3com add port to this vlan but no effect:( pc connected to this
port (vlan3 3com) do not
see PC into Cisco vlan3, but see pc into Cisco vlan1 (Cisco default
vlan).... Where is my mistake?

I know that is not exactly Cisco question, but end point switches in my
network are 3com:(

TIA

Next message: Richard Bosire: "Re: [nsp] Input queue drops on FastEthernet"
Previous message: Jared Mauch: "Re: [nsp] Corrupted 6500 MSFC bootflash:"
In reply to: Jared Mauch: "Re: [nsp] Corrupted 6500 MSFC bootflash:"
Next in thread: Steve Shultz: "Re: [nsp] Corrupted 6500 MSFC bootflash:"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:00 EDT