You should be able to boot into catos,
put an ip on the mgmt intf, add the gig port to the
same vlan and make the copy work.
it may complain if you are doing catos <-> ios migration
based on the image, but you can force it.
On Fri, Jun 14, 2002 at 07:41:25PM -0700, Steve Shultz wrote:
> If the bootflash of a 6500 MSFC1 get corrupted,
> is xmodem the only way to reload it from ROMmon?
> I have a tftp server directly attached to one of its Gig
> ports. I have a Sup 1A which I can boot with CatOS
> or IOS. And where does ROMMON expect to boot the
> file cisco2-Cat6k-MSFC from?
-- Jared Mauch | pgp key available via finger from firstname.lastname@example.org clue++; | http://puck.nether.net/~jared/ My statements are only mine.
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:00 EDT