Re: [nsp] 12.0.6.3T

From: Edward Henigin (ed@staff.texas.net)
Date: Tue Sep 21 1999 - 23:37:29 EDT


Mike,

        I've got the same mix as you -- except I also need GEIP
and PA-2FEISL. I'm running 12.0(5)T, and not having any particular
problems. -- Let me amend that: Once I turned dCEF *off* on the
GEIPs, and ignoring defect CSCdm62052 (which is fixed in 12.0(6)),
I haven't had any particular problems.

        Now, I'm trying to figure out of 12.0S will support everything
I use. If I recall correctly, 12.0S is synced from 12.0, so if I
see support for something in 12.0, then it should also be in 12.0S.
Now, I can't seem to find the page that said that so I can confirm :p
Sometimes it's *very* hard to find out what software features
and hardware support there is in a given release :|

        Ed

--
On Tue, Sep 21, 1999 at 09:08:14PM -0400, Michael K. Smith said:
> Hi All:
> 
> Anyone have any experience using this software rev for RSP, Enterprise-VIP,
> or any of the IOS releases close to this.  I have been told this is what I
> must use to enable ISL, HSRP and CEF at the same time, but I'm a little
> leary about moving out of the 11.1.x-CC train.
> 
> Any insights, thoughts and/or rants are greatly appreciated.
> 
> Mike



This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:06 EDT