12.0S does support ISL, HSRP and CEF. Just stick to 12.0(5.6)S and later
though.
-dorian
On Tue, Sep 21, 1999 at 10:37:29PM -0500, Edward Henigin wrote:
> I've got the same mix as you -- except I also need GEIP
> and PA-2FEISL. I'm running 12.0(5)T, and not having any particular
> problems. -- Let me amend that: Once I turned dCEF *off* on the
> GEIPs, and ignoring defect CSCdm62052 (which is fixed in 12.0(6)),
> I haven't had any particular problems.
>
> Now, I'm trying to figure out of 12.0S will support everything
> I use. If I recall correctly, 12.0S is synced from 12.0, so if I
> see support for something in 12.0, then it should also be in 12.0S.
> Now, I can't seem to find the page that said that so I can confirm :p
> Sometimes it's *very* hard to find out what software features
> and hardware support there is in a given release :|
>
> Ed
>
> --
> On Tue, Sep 21, 1999 at 09:08:14PM -0400, Michael K. Smith said:
> > Hi All:
> >
> > Anyone have any experience using this software rev for RSP, Enterprise-VIP,
> > or any of the IOS releases close to this. I have been told this is what I
> > must use to enable ISL, HSRP and CEF at the same time, but I'm a little
> > leary about moving out of the 11.1.x-CC train.
> >
> > Any insights, thoughts and/or rants are greatly appreciated.
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:06 EDT