Jim Warner <warner@cats.UCSC.EDU> writes:
> Question:
>
> If I order a clear channel point-to-point T1 from a LEC, when
> it's turned over to me -- before I place any equipment -- should
> I expect to see all ones or nothing at all on the pair carrying
> signal in my direction?
If they put the traditional type of jack -- RJ48C biscuit *with
shorting bars* -- on the end of the circuit, you'll see a loop. The
shorting bars loop up the circuit when the CPE is unplugged.
---Rob
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:06 EDT