On Fri, 2 Nov 2001, Zhang, Anchi wrote:
I assume you have read:
http://www.cisco.com/warp/customer/105/38.shtml
http://www.cisco.com/warp/customer/105/56.html
This probably won't answer your question but others listening in will at
least have someplace to refer to.
-Hank
> c7200-jk2o3s-mz.121-6.E2.bin has the fix.Never tested others. -anchi
>
> -----Original Message-----
> From: Joe McGuckin [mailto:joe@monk.via.net]
> Sent: Friday, November 02, 2001 1:57 PM
> To: cisco-nsp@puck.nether.net
> Subject: [nsp] GRE tunnels
>
>
> Inthe past there have been problems with Cisco's implementation
> of GRE, mostly dealing with PMTU handling.
>
> Has this been fixed? Bug ID CSCdv22089 seems to indicate that it has.
>
> So, for all you Cisco experts out there... The question is:
>
> If I tunnel over fast ethernet between 2 cisco routers, will PMTU
> work correctly? I'm currently using 12.0(6)S, but I'll willingly
> switch to another 12.0(S|T) image to get this to work.
>
> Thanks,
>
> Joe
>
>
> --
>
> Joe McGuckin
>
> ViaNet Communications
> 994 San Antonio Road
> Palo Alto, CA94303
>
> Phone: 650-213-1302
> Cell:650-207-0372
> Fax: 650-969-2124
>
Hank Nussbacher
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:22 EDT