RE: [nsp] GRE tunnels

From: Zhang, Anchi (AZhang@reliant.com)
Date: Fri Nov 02 2001 - 15:11:24 EST

Next message: Ryan O'Connell: "Re: [nsp] 1000baseT GBIC"
Previous message: STEPHANE BENFREDJ: "RE: [nsp] OSPF Load balance question"
Maybe in reply to: Joe McGuckin: "[nsp] GRE tunnels"
Next in thread: Hank Nussbacher : "RE: [nsp] GRE tunnels"
Reply: Hank Nussbacher : "RE: [nsp] GRE tunnels"
Reply: Hank Nussbacher : "RE: [nsp] GRE tunnels"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

c7200-jk2o3s-mz.121-6.E2.bin has the fix. Never tested others. -anchi

-----Original Message-----
From: Joe McGuckin [mailto:joe@monk.via.net]
Sent: Friday, November 02, 2001 1:57 PM
To: cisco-nsp@puck.nether.net
Subject: [nsp] GRE tunnels

In the past there have been problems with Cisco's implementation
of GRE, mostly dealing with PMTU handling.

Has this been fixed? Bug ID CSCdv22089 seems to indicate that it has.

So, for all you Cisco experts out there... The question is:

If I tunnel over fast ethernet between 2 cisco routers, will PMTU
work correctly? I'm currently using 12.0(6)S, but I'll willingly
switch to another 12.0(S|T) image to get this to work.

Thanks,

Joe

Joe McGuckin

ViaNet Communications 994 San Antonio Road Palo Alto, CA 94303

Phone: 650-213-1302 Cell: 650-207-0372 Fax: 650-969-2124

Next message: Ryan O'Connell: "Re: [nsp] 1000baseT GBIC"
Previous message: STEPHANE BENFREDJ: "RE: [nsp] OSPF Load balance question"
Maybe in reply to: Joe McGuckin: "[nsp] GRE tunnels"
Next in thread: Hank Nussbacher : "RE: [nsp] GRE tunnels"
Reply: Hank Nussbacher : "RE: [nsp] GRE tunnels"
Reply: Hank Nussbacher : "RE: [nsp] GRE tunnels"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:53 EDT