At 11:13 PM 12/26/2001 +0000, isamar@isamarmaia.org wrote:
>Dear Folks,
>
>What's the best setup for Fastethernet in a Cisco 2600 ?
>I am using this:
>duplex auto
>speed auto
>
>The router is connected to a 10/100 HUB but sometimes we are suffering
>some instability(interface resets).
>I am using the network cable which came included in the router's package.
Auto-negotiation is infamous for problems. It's good practice to always
nail down your router interfaces, so in your case it would be:
duplex half
speed 100
This might not fix your resets, but it's a good place to start.
Bradley
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:26 EDT