On Wed, Jan 23, 2002 at 01:28:44PM -0500, Charles Sprickman wrote:
> Same question, but with 12.0(20)S...
>
> Thanks,
>
> Charles
>
> | Charles Sprickman | Internet Channel
> | INCH System Administration Team | (212)243-5200
> | spork@inch.com | access@inch.com
>
> On Wed, 23 Jan 2002, Benjie Ko wrote:
>
> > Hello,
> >
> > Is car/cef supported on an encap dot1q fastethernet
> > subinterface? hardware is 7500 with IOS 12.1(10). I
> > have a 2 port FE card.
> > If yes, since car can do rate limiting on each
> > interface, does it follow that I can rate limit on
> > each subinterface or do i need to configure a per ip
> > rate limit on the main interface itself?
> > Thanks.
http://www.cisco.com/warp/public/770/fn17399.shtml
You probally want to check that you don't have this PA.
Cisco is removing support for it.
> >
> >
> > __________________________________________________
> > Do You Yahoo!?
> > Send FREE video emails in Yahoo! Mail!
> > http://promo.yahoo.com/videomail/
> >
-- Jared Mauch | pgp key available via finger from jared@puck.nether.net clue++; | http://puck.nether.net/~jared/ My statements are only mine.
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:29 EDT