On Thu, Jan 24, 2002 at 09:48:51AM -0500, Birsen Ozturk wrote:
> There is a Cisco2500 that has one 10BaseT and one AUI port, but when you run
> "sho ip bgp summ" it shows only Ethernet0. I want to use both ethernets. How
> can I manage that? I would appreciate ant idea.
"Classic" 2500's (2501, 2503, ...) do NOT have 10BaseT interfaces.
The RJ45 sockets are AUX, Console and (depending on model) ISDN BRI, but
I'm not sure about more recent variants, but if the box claims it has only
Ethernet0 ("show version" will also clarify this) it seems as if it's in
the 1600 and similar series - it has 10BaseT and AUI, but they are wired
to the same ethernet chip, so no way to use them simultaneously.
-- USENET is *not* the non-clickable part of WWW! //www.muc.de/~gert/ Gert Doering - Munich, Germany firstname.lastname@example.org fax: +49-89-35655025 email@example.com
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:29 EDT