Is there an easy way on a Cisco AS5200 or AS5300 to attach to a B channel
and attempt to dial a number to test isdn dial-out? i.e. on a PM3, I
could "attach S20\natdt5551212\n" to dial out. Is there anything as
simple in IOS, or do I have to create a dialer interface?
I need to test some PRI to see if they have dial-out and if so, look into
setting up dial-back.
----------------------------------------------------------------------
Jon Lewis *jlewis@lewis.org*| Spammers will be winnuked or
System Administrator | nestea'd...whatever it takes
Atlantic Net | to get the job done.
_________http://www.lewis.org/~jlewis/pgp for PGP public key__________
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:07 EDT