Hi Dmitri,
>Port Align-Err FCS-Err Xmit-Err Rcv-Err UnderSize
>----- ---------- ---------- ---------- ---------- ---------
> 5/1 293 197 0 0 0
>
>Port Single-Col Multi-Coll Late-Coll Excess-Col Carri-Sen Runts Giants
>----- ---------- ---------- ---------- ---------- --------- --------- ---------
> 5/1 0 0 0 0 0 142 0
>
>And these counters keep on raising... Switch thinks that port is connected,
>"LINK" LED is lit, but Router does not seem to think so...
typical picture if your Cat is 100/FDX and your host/router is 100/HDX
>2620's FastEther0/0 connected to 5/1 is:
>
>interface FastEthernet0/0
> no ip address
> no ip directed-broadcast
> speed 100
sounds like beeing default (half-duplex), a "show int FastEth0/0" will
tell you, change it to "full-duplex".
Good luck
CP
--- ---------------------------------------------------------------------- ---
--- Christian Panigl : Vienna University Computer Center - ACOnet ---
--- VUCC - ACOnet - VIX : -------------------------------------------- ---
--- Universitaetsstrasse 7 : Mail: Panigl@CC.UniVie.ac.at (CP8-RIPE) ---
--- A-1010 Vienna / Austria : Tel: +43 1 4277-14032 (Fax: -9140) ---
--- ---------------------------------------------------------------------- ---
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:07 EDT