Charles:
www.cisco.com/go/fn is the feature navagator. Good place to start. Search for
802.1Q and then add you ssh.
Looks around 12.021S and higher for the 7200 and the 3600 is around 12.1.3T
I would make sure that you run through the FN and the HW compat matrix to make
sure that we don't exclude any modules you are running.
12.1(3)T
----SIGNAURE-------
Douglas M. Todd, Jr.
Network Engineering
CCNP, CCDA
Partners Health Care
Building 149
149 13 Street
Charlestown, MA 02129-200
Tel: 617.726.1403
Email: dtodd@partners.org
--------------------------------------------------------------------
PGP Finger Print: 9429 CAE3 B2D1 C2E1 DFBC E7A6 E90A 9BE5 C7B6 47BC
Key available via email.
Verisign S/N: 3ff65cdf58b9dceda004baeed49e16cf
https://digitalid.verisign.com/services/client/index.html
> -----Original Message-----
> From: Charles Sprickman [SMTP:spork@inch.com]
> Sent: Tuesday, February 26, 2002 2:44 PM
> To:
> Subject: [nsp] 3620, 12.0(21)S1, VLANs
>
> Hi,
>
> I have the above version of SW on a 3620 and a 7206. On the 7206, I am
> able to create vlans on my FE interfaces (ie : in faste 1/0.2 -> encaps
> dot1q etc.). On the 3620, the "encapsulation" command is not available.
>
> Am I missing something or does the service provider version version not
> support vlans on the 3620? If it does not, what's a good version that
> will get me ssh, the snmp fix, vlans and ospf with few other frills?
>
> Thanks,
>
> Charles
>
> | Charles Sprickman | Internet Channel
> | INCH System Administration Team | (212)243-5200
> | spork@inch.com | access@inch.com
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:34 EDT