Drop us the config and we can give you a hand.
==DMT>
> -----Original Message-----
> From: Tay Chee Yong [SMTP:tcy@pacific.net.sg]
> Sent: Tuesday, February 26, 2002 9:16 PM
> To: Angelo De Guzman; cisco-nsp@puck.nether.net
> Subject: Re: Supporter sub interface.
>
> Hi,
>
> Talking about E1 serial sub-interface, I am currently working with a Serial
> sub-interface on a Cisco 2651. My setup now is connecting 2 serials on 2
> different router with a back-to-back V.35 cable.
>
> Configured sub-interface with ip on both end, but I am unable to ping to
> the peer. However, if I were to configure an ip address on the main
> interface, I will then be able to ping to the sub-interface.
>
> What have I missed?
>
> Cheeyong
>
> At 05:27 PM 2/26/02 +0800, Angelo De Guzman wrote:
> >Hi to All,
> > I just wanted to know if anyone on the list knows the maximum number of
> >sub-interface an E1 serial interface support? And does the number of
> >subinterface matter if it's point-to-point or point-to-multipoint. I'm
> >using a
> >hub and spoke topology in my design. And it's a frame-relay connection.
> >TIA,
> >Angelo De Guzman
>
> Regards,
> Cheeyong
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:34 EDT