RE: RE: [nsp] Frame Relay - loopback

From: Hagop Karaoghlanian (hkaraoghlanian@corp.attcanada.ca)
Date: Wed Feb 27 2002 - 11:42:33 EST


Giuliano,

remember that loopback interface is a "logical" interface, thus, it will not
know where to send traffic to...therefore it will look at physical intercaes
directly attached to the same router to send to.

correct me if I am wrong.

HK

---------------
Hagop R. Karaoghlanian, CCNP, CCDP
Sr. Network Specialist
AT&T Canada, Customer Implementation
905 King St West
416-341-5876
416-341-6876
hkaraoghlanian@corp.attcanada.ca

  "Wisdom is not in words; Wisdom is meaning within words"
Khalil Gibran

-----Original Message-----
From: Giuliano Cardozo Medalha [mailto:giuliano@usp.br]
Sent: Wednesday, February 27, 2002 11:37 AM
To: DTODD@PARTNERS.ORG
Cc: cisco-nsp@puck.nether.net
Subject: Re: RE: [nsp] Frame Relay - loopback

OK, but I did not understand the meaning of that interface !!!
 

 
When I create one and put a IP number on it, it start to scan all phisical
interfaces to send packages ?
 

 
Giuliano
 

 
Em 27 Feb 2002, Todd, Douglas M. escreveu:
 

 
>One reason is that loopback interfaces never go down or flap. Thus when you

 
>use
 
>a loopback interface for any purpose it's always up and never flapps.
 
>
 
>----SIGNAURE-------
 
>Douglas M. Todd, Jr.
 
>Network Engineering
 
>CCNP, CCDA
 
>Partners Health Care
 
>Building 149
 
>149 13 Street
 
>Charlestown, MA 02129-200
 
>Tel: 617.726.1403
 
>Email: dtodd@partners.org
 
>--------------------------------------------------------------------
 
>PGP Finger Print: 9429 CAE3 B2D1 C2E1 DFBC E7A6 E90A 9BE5 C7B6 47BC
 
>Key available via email.
 
>Verisign S/N: 3ff65cdf58b9dceda004baeed49e16cf
 
>https://digitalid.verisign.com/services/client/index.html
 
>
 
>> -----Original Message-----
 
>> From: Giuliano Cardozo Medalha [SMTP:giuliano@usp.br]
 
>> Sent: Wednesday, February 27, 2002 11:16 AM
 
>> To: cisco-nsp@puck.nether.net
 
>> Subject: [nsp] Frame Relay - loopback
 
>>
 
>> Hi,
 
>>
 
>>
 
>>
 
>> I would like to know why we point Frame Relay or ATM subinterfaces for a

 
>> loppback interface ?
 
>>
 
>>
 
>>
 
>> Whats a loopback interface ?
 
>>
 
>>
 
>>
 
>> Thanks a lot
 
>>
 
>>
 
>>
 
>> Giuliano
 
>>
 
>>
 
>>
 
>
 
>----------



This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:34 EDT