hmm... Anyone using PA CE1 in 7200... please respond.... I do not believe that only few people which responed offline have that
problems.. I can proove them with alot of PA's ....
the problem is that upon a time (2 weeks?) there is certain performance problem with this PA's and later they gonna
berserk...ehm....
there are more bugs concerning this PA's.... with FW 1.4.. and all brand of IOS up to latest T releases... (cisco keeping them in
silence....)
somehow cisco keeping this informations in secret.....
dammn!!
alex
> -----Original Message-----
> From: KF [mailto:kf@reign.sk]
> Sent: Monday, March 11, 2002 6:59 PM
> To: 'Alessandro Chiolo'; cisco-nsp@puck.nether.net
> Subject: RE: [nsp] Channelized E1 (balanced) PA 2 ports .....software
> probz...
>
>
> hmm it's not public... :-.
>
> a.
>
>
> > -----Original Message-----
> > From: Alessandro Chiolo [mailto:alex@sauro.org]
> > Sent: Monday, March 11, 2002 10:47 AM
> > To: kf@reign.sk; cisco-nsp@puck.nether.net
> > Subject: Re: [nsp] Channelized E1 (balanced) PA 2 ports
> .....software
> > probz...
> >
> >
> > "Sorry -- The defect you have requested CSCdt4889 cannot be
> displayed.
> > This may be due to one or more of the following:
> >
> > The defect number does not exist.
> > The defect does not have a customer-visible description
> available yet.
> > The defect has been marked Cisco Confidential."
> >
> > cheers,
> > Alex
> >
> > ----- Original Message -----
> > From: "KF" <kf@reign.sk>
> > To: <cisco-nsp@puck.nether.net>
> > Sent: Monday, March 11, 2002 10:28 AM
> > Subject: RE: [nsp] Channelized E1 (balanced) PA 2 ports
> .....software
> > probz...
> >
> >
> > > everyone hitting this bug..
> > >
> > > CSCdt4889
> > >
> > > a.
> > >
> > >
> > > >
> > > >
> > > > Heyla,
> > > >
> > > > since last months.... I'm encountering an numerous problems
> > > > with Channelized traffic over Channelized E1 (balanced) PA's
> > > > (2ports) on
> > > > the 7206's.
> > > >
> > > > All subinterfaces running CEF/FLOW... but this problem
> > > > occuring also with route cache disabled:
> > > >
> > > > After the "long" time some of the subinterfaces starting to
> > > > have output drops ... a LOT OF.... I'm wiggin' outta.. ,
> > found that
> > > > physical layer have no errors... and the workaround is to
> > > > reload only ... no shut/no shut controller either sub intf.
> > > > help... Some
> > > > "circuits" gone berserk .. all this happening "often" let's
> > > > say once per week or two.. but..(t).....
> > > >
> > > > Was there any RMA concerning this PA's? or anyone
> > > > experienced simmilar probs?
> > > >
> > > > running from 12.0.18-19S1 on different boxes... all doin' the
> > > > same.. Should I wax a TELCO?
> > > >
> > > > greetz
> > > >
> > > > Alex
> > > >
> > > >
> > >
> > >
> >
> >
> >
>
>
>
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:36 EDT