[nsp] ospf virtual link

From: Dhiman Barman (dhiman@cs.bu.edu)
Date: Mon Mar 25 2002 - 12:35:18 EST

Hi,
  I am trying to create a virtual link as follows:

                10.0.3.200/24(area 0) R3 192.168.2.1/24(area0)
                                                  |
                                                 172.16.11.1/24 (area 0)
                                                  |
                                                  |
                                                  |
                                                 172.16.11.2/24 (area 0)
                                                  |
                                                  R2-----
                                                  |
                                                   192.168.3.1/24(area 1)
                                                  |
                                                  |
                                                   192.168.3.2/24(area 1)
                                                  |
          10.0.1.200/24(area 2)----R1--192.168.2.2(area 2)
                                                  

  On R1:
                router ospf 100
                area 1 virtual-link 172.16.11.2

  On R3:
                
                router ospf 300
                area 1 virtual-link 192.168.2.2

Right now, now routing is established.

In other words, how should I configure virtual link to provide
connectivity of R1 to R3.

Thanks,
Dhiman

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:38 EDT