Dhiman,
The virtual link from R1 should be to R2, which the ABR for area 1, not R3.
At 12:35 PM 3/25/2002 -0500, Dhiman Barman wrote:
>Hi,
> I am trying to create a virtual link as follows:
>
> 10.0.3.200/24(area 0) R3 192.168.2.1/24(area0)
> |
> 172.16.11.1/24 (area 0)
> |
> |
> |
> 172.16.11.2/24 (area 0)
> |
> R2-----
> |
> 192.168.3.1/24(area 1)
> |
> |
> 192.168.3.2/24(area 1)
> |
> 10.0.1.200/24(area 2)----R1--192.168.2.2(area 2)
>
>
>
> On R1:
> router ospf 100
> area 1 virtual-link 172.16.11.2
>
>
> On R3:
>
> router ospf 300
> area 1 virtual-link 192.168.2.2
>
>
>Right now, now routing is established.
>
>
>In other words, how should I configure virtual link to provide
>connectivity of R1 to R3.
>
>
>Thanks,
>Dhiman
Harold Ritter, CCIE 4168
Advanced Network Services - ISP East
Cisco Systems
300 Apollo Drive
Chelmsford, MA 01824 USA
Phone: 978 497 3129
Fax: 978 497 3129
Cisco Systems- "Empowering the Internet Generation."
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:38 EDT