Hi,
I am trying to create a virtual link as follows:
10.0.3.200/24(area 0) R3 192.168.2.1/24(area0)
|
172.16.11.1/24 (area 0)
|
|
|
172.16.11.2/24 (area 0)
|
R2-----
|
192.168.3.1/24(area 1)
|
|
192.168.3.2/24(area 1)
|
10.0.1.200/24(area 2)----R1--192.168.2.2(area 2)
On R1:
router ospf 100
area 1 virtual-link 172.16.11.2
On R3:
router ospf 300
area 1 virtual-link 192.168.2.2
Right now, now routing is established.
In other words, how should I configure virtual link to provide
connectivity of R1 to R3.
Thanks,
Dhiman
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:09 EDT