I have a simple question (I hope).....
I now have 3 T-1's in my 3640 Cisco and need to place static routes to
different T-1's so all traffic does not go out 1 single T-1..
Below is my current ip route statements:
ip route 0.0.0.0 0.0.0.0 Serial1/0:1.1
ip route 127.0.0.0 255.0.0.0 Null0
ip route 0.0.0.0 0.0.0.0 serial 0/0
And my 'sh ip route' output:
Gateway of last resort is 0.0.0.0 to network 0.0.0.0
C 208.239.156.0/24 is directly connected, FastEthernet1/0
S 127.0.0.0/8 is directly connected, Null0
63.0.0.0/24 is subnetted, 1 subnets
C 63.64.44.0 is directly connected, Ethernet0/1
S* 0.0.0.0/0 is directly connected, Serial1/0:1.1
I am doing something wrong because if I define my routes via ip route
statement(s) and remove the 0.0.0.0 0.0.0.0 ip route traffic gets in but
not out??
Any help any one can offer is welcome...
Paul Jacobs
Network admin
http://www.netpacq.com
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:07 EDT