Great. So your saying to get PPPoE with ATM support on my NM-4T-IMA I
need to be using a 3640 probably.
Assuming I get a 3640 for the job, is the code good enough for production
you would say? This is a new dsl setup for a client and would probably
only amount to 100 or so dsl connections max. I want to use radius and
pppoe to make a nice clean "dialup like" setup.
Brian
On Thu, 4 Apr 2002 jlewis@lewis.org wrote:
> On Thu, 4 Apr 2002, Brian wrote:
>
> > I am going to be using a Cisco 2620 with a NM-4T1-IMA to terminate
> > some DSL. It will be using PPPoE and ATM. Can someone recommend
> > a IOS version that has been working for them in this capacity?
>
> How about 13.0(T)?
> We just replaced a 2600 with NM-4T1-IMA card with a 3640 because Cisco
> don't play PPPoE on the 2600...and they (2600's) don't do MPLS either.
>
> --
> ----------------------------------------------------------------------
> Jon Lewis *jlewis@lewis.org*| I route
> System Administrator | therefore you are
> Atlantic Net |
> _________ http://www.lewis.org/~jlewis/pgp for PGP public key_________
>
-----------------------------------------------
Brian Feeny, CCIE #8036 e: signal@shreve.net
Network Engineer p: 318.222.2638x109
ShreveNet Inc. f: 318.221.6612
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:39 EDT