[nsp] 2924/linux vlan

From: Kathleen Ronay (kronay@saffron.org)
Date: Mon Apr 08 2002 - 17:11:22 EDT


Having trouble configuring a vlan that will enable a Linux server and
our 7200 router to communicate through a cisco 2924.

Linux ---- Cisco2924 ---- Cisco7200

I am hoping it is simply a configuration error. Any ideas woud be very
helpful.

Cisco2924# sh run
interface FastEthernet0/15
 switchport access vlan 127
!
interface FastEthernet0/19
 switchport multi vlan 1,127-129
 switchport mode multi

I can see both MAC addresses:
Cisco2924#sh mac-address-table | i 127
0004.6df0.a000 Dynamic 127 FastEthernet0/19
0030.4811.3236 Dynamic 127 FastEthernet0/15

The 7200 router:
interface FastEthernet0/0.1
 encapsulation dot1Q 127
 ip address 192.168.20.1 255.255.255.0
!

The redhat server has the correct ip and subnet mask, but reports the 7200
router ip (192.168.20.1) as unreachable.

Any ideas?

Thanks,

-Kat



This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:40 EDT