I can neither confirm nor deny that it was part of any test that I ever
took, but ip ospf network point-to-point is a good thing to understand
about OSPF. By default OSPF treats a loopback address as a stub host
and advertises a /32 no matter what is configured as the mask on the
interface. The network point-to-point command instructs OSPF to treat it
as a network/subnet and to advertise the mask that is configured.
This was added to IOS a while back (in 11.mumble if I remember
correctly).
Rick
Niels Bakker wrote:
>
> > On Tue, Apr 16, 2002 at 09:40:38PM +0800, Nick wrote:
> >> the magic was to add 'ip ospf network point-to-point' under the lo0
> >> interface - thankfully pointed out by a legend on this mailing list.
>
> * gert@greenie.muc.de (Gert Doering) [Tue 16 Apr 2002, 15:39 CEST]:
> > Huh? Now what is that one doing? *curious*
>
> It makes it possible for Loopback0 to get a non-/32 netmask
> redistributed into OSPF and other dynamic routing protocols.
>
> I think this trick is actually part of some CCIE lab tests :)
>
> Regards,
>
> -- Niels.
-- Rick Burts CCIE 4615 CCSI Email: rburts@netcraftsmen.net Chesapeake NetCraftsmen 1290 Bay Dale Drive, #312 443.994.0675 Arnold, MD 21012-2325 WWW: http://www.netcraftsmen.netWith 7 CCIEs on staff Chesapeake NetCraftsmen offers services in network consulting and training. Our services include Network Design, Implementation, Troubleshooting as well as Network Management.
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:41 EDT